IEEE 802

IEEE 802 is a family of Institute of Electrical and Electronics Engineers (IEEE) standards for local area networks (LANs), personal area networks (PANs), and metropolitan area networks (MANs). The IEEE 802 LAN/MAN Standards Committee (LMSC) maintains these standards. The IEEE 802 family of standards has had twenty-four members, numbered 802.1 through 802.24, with a working group of the LMSC devoted to each. However, not all of these working groups are currently active.

The IEEE 802 standards are restricted to computer networks carrying variable-size packets, unlike cell relay networks, for example, in which data is transmitted in short, uniformly sized units called cells. Isochronous signal networks, in which data is transmitted as a steady stream of octets, or groups of octets, at regular time intervals, are also outside the scope of the IEEE 802 standards.

The number 802 has no significance: it was simply the next number in the sequence that the IEEE used for standards projects.[1]

Side-by-side comparison between the OSI (left) and IEEE 802 (right) reference models

The services and protocols specified in IEEE 802 map to the lower two layers (data link and physical) of the seven-layer Open Systems Interconnection (OSI) networking reference model. IEEE 802 divides the OSI data link layer into two sub-layers: logical link control (LLC) and medium access control (MAC), as follows:

Everything above LLC is explicitly out of scope for IEEE 802 (as "upper layer protocols", presumed to be parts of equally non-OSI Internet reference model).

The most widely used standards are for Ethernet, Bridging and Virtual Bridged LANs, Wireless LAN, Wireless PAN, Wireless MAN, Wireless Coexistence, Media Independent Handover Services, and Wireless RAN. [2]

  1. ^ Institute of Electrical and Electronics Engineers (September 2004). "Overview and Guide to the IEEE 802 LMSC" (PDF). Retrieved October 13, 2020.
  2. ^ "IEEE802". www.ieee802.org. Retrieved 2022-11-27.

Developed by StudentB