PS/2 port

PS/2 port

The color-coded PS/2 connection ports (purple for keyboard and green for mouse)
Type	Keyboard and computer mouse data connector
Production history
Designer	IBM
Designed	1987; 37 years ago (1987)
Superseded	DIN connector, DE-9 connector and Mini-DIN-9 InPort
Superseded by	USB (USB human interface device class)
General specifications
Hot pluggable	No
External	Yes
Cable	4 wires plus shield
Pins	6
Connector	Mini-DIN-6
Electrical
Signal	5 V DC
Earth	Dedicated pin and shield
Max. voltage	5.0±0.5 V
Max. current	275 mA
Data
Data signal	Serial data at 10.0–16.7 kHz with 1 start bit, 8 data bits (LSB first), 1 parity bit (odd), 1 stop bit, [1 ack bit (if host-to-device)]
Bitrate	7–12 kbit/s
Max. devices	1 or 2[a]
Protocol	Serial
Pinout
Female connector from the front
Pin 1	+DATA	Data
Pin 2		Not connected[b]
Pin 3	GND	Ground
Pin 4	Vcc	+5 V DC at 275 mA
Pin 5	+CLK	Clock
Pin 6		Not connected[c]
^ Keyboard and mouse ports may be combined into a single port which can be used to connect both by splitter cable. ^ Sometimes, mouse Data for splitter cable. ^ Sometimes, mouse Clock for splitter cable.

The PS/2 port is a 6-pin mini-DIN connector used for connecting keyboards and mice to a PC compatible computer system. Its name comes from the IBM Personal System/2 series of personal computers, with which it was introduced in 1987. The PS/2 mouse connector generally replaced the older DE-9 RS-232 "serial mouse" connector, while the PS/2 keyboard connector replaced the larger 5-pin/180° DIN connector used in the IBM PC/AT design. The PS/2 keyboard port is electrically and logically identical to the IBM AT keyboard port, differing only in the type of electrical connector used. The PS/2 platform introduced a second port with the same design as the keyboard port for use to connect a mouse; thus the PS/2-style keyboard and mouse interfaces are electrically similar and employ the same communication protocol. However, unlike the otherwise similar Apple Desktop Bus connector used by Apple, a given system's keyboard and mouse port may not be interchangeable since the two devices use different sets of commands and the device drivers generally are hard-coded to communicate with each device at the address of the port that is conventionally assigned to that device. (That is, keyboard drivers are written to use the first port, and mouse drivers are written to use the second port.^[1])