Template:Infobox dam

{{{name}}}
{{{name}}}
	{{{image_caption}}}
	{{{location_map_caption}}}
Official name	{{{name_official}}}
Country	{{{country}}}
Location	{{{location}}}
Coordinates	0°N 0°E / 0°N 0°E
Purpose	{{{purpose}}}
Status	{{{status}}}
Construction began	{{{construction_began}}}
Opening date	{{{opening}}}
Demolition date	{{{demolished}}}
Construction cost	{{{cost}}}
Built by	{{{builder}}}
Designed by	{{{designed_by}}}
Owner(s)	{{{owner}}}
Operator(s)	{{{operator}}}
Upper dam and spillways
Type of dam	{{{dam_type}}}
Impounds	{{{dam_crosses}}}
Height (foundation)	{{{dam_height_foundation}}}
Height (thalweg)	{{{dam_height_thalweg}}}
Length	{{{dam_length}}}
Elevation at crest	{{{dam_elevation_crest}}}
Width (crest)	{{{dam_width_crest}}}
Width (base)	{{{dam_width_base}}}
Dam volume	{{{dam_volume}}}
Spillways	{{{spillway_count}}}
Spillway type	{{{spillway_type}}}
Spillway length	{{{spillway_length}}}
Spillway capacity	{{{spillway_capacity}}}
Spillway volumetric flow rate	{{{spillway_volumetric_flow_rate}}}
Spillway type	{{{spillway_type2}}}
Spillway length	{{{spillway_length2}}}
Spillway capacity	{{{spillway_capacity2}}}
Spillway volumetric flow rate	{{{spillway_volumetric_flow_rate2}}}
Spillway type	{{{spillway_type3}}}
Spillway length	{{{spillway_length3}}}
Spillway capacity	{{{spillway_capacity3}}}
Spillway volumetric flow rate	{{{spillway_volumetric_flow_rate3}}}
Upper reservoir
Creates	{{{res_name}}}
Total capacity	{{{res_capacity_total}}}
Active capacity	{{{res_capacity_active}}}
Inactive capacity	{{{res_capacity_inactive}}}
Catchment area	{{{res_catchment}}}
Surface area	{{{res_surface}}}
Maximum length	{{{res_max_length}}}
Maximum width	{{{res_max_width}}}
Maximum water depth	{{{res_max_depth}}}
Normal elevation	{{{res_elevation}}}
Tidal range	{{{res_tidal_range}}}
Lower dam and spillways
Type of dam	{{{lower_dam_type}}}
Impounds	{{{lower_dam_crosses}}}
Height (foundation)	{{{lower_dam_height_foundation}}}
Height (thalweg)	{{{lower_dam_height_thalweg}}}
Length	{{{lower_dam_length}}}
Elevation at crest	{{{lower_dam_elevation_crest}}}
Width (crest)	{{{lower_dam_width_crest}}}
Width (base)	{{{lower_dam_width_base}}}
Dam volume	{{{lower_dam_volume}}}
Spillways	{{{lower_spillway_count}}}
Spillway type	{{{lower_spillway_type}}}
Spillway length	{{{lower_spillway_length}}}
Spillway capacity	{{{lower_spillway_capacity}}}
Spillway volumetric flow rate	{{{lower_spillway_volumetric_flow_rate}}}
Spillway type	{{{lower_spillway_type2}}}
Spillway length	{{{lower_spillway_length2}}}
Spillway capacity	{{{lower_spillway_capacity2}}}
Spillway volumetric flow rate	{{{lower_spillway_volumetric_flow_rate2}}}
Spillway type	{{{lower_spillway_type3}}}
Spillway length	{{{lower_spillway_length3}}}
Spillway capacity	{{{lower_spillway_capacity3}}}
Spillway volumetric flow rate	{{{lower_spillway_volumetric_flow_rate3}}}
Lower reservoir
Creates	{{{lower_res_name}}}
Total capacity	{{{lower_res_capacity_total}}}
Active capacity	{{{lower_res_capacity_active}}}
Inactive capacity	{{{lower_res_capacity_inactive}}}
Catchment area	{{{lower_res_catchment}}}
Surface area	{{{lower_res_surface}}}
Maximum length	{{{lower_res_max_length}}}
Maximum width	{{{lower_res_max_width}}}
Maximum water depth	{{{lower_res_max_depth}}}
Normal elevation	{{{lower_res_elevation}}}
Tidal range	{{{lower_res_tidal_range}}}
{{{plant_name}}}
Coordinates	1°1′1″N 1°1′1″E / 1.01694°N 1.01694°E
Operator(s)	{{{plant_operator}}}
Commission date	{{{plant_commission}}}
Decommission date	{{{plant_decommission}}}
Type	{{{plant_type}}}
Hydraulic head	{{{plant_hydraulic_head}}}
Turbines	{{{plant_turbines}}}
Pump-generators	{{{plant_pumpgenerators}}}
Pumps	{{{plant_pumps}}}
Installed capacity	{{{plant_capacity}}}
Capacity factor	{{{plant_capacity_factor}}}
Overall efficiency	{{{plant_efficiency}}}
Storage capacity	{{{plant_storage_hours}}}
Annual generation	{{{plant_annual_gen}}}
	Website; {{{website}}}
	{{{extra}}}

Template documentation[view] [edit] [history] [purge]

This template is used on approximately 5,800 pages and changes may be widely noticed. Test changes in the template's /sandbox or /testcases subpages, or in your own user subpage. Consider discussing changes on the talk page before implementing them.

Preview message: Transclusion count updated automatically (see documentation).

This template adds an automatically generated short description. If the automatic short description is not optimal, replace it by adding {{Short description}} at the top of the article.

This template uses Lua:

Usage

Use the following infobox for all types of hydroelectric power stations involving dams, including pumped-storage. For all types of wave and tidal power stations, as well as all other types of power stations, please use {{Infobox power station}}.

{{Infobox dam
| name                                 = 
| name_official                        = 
| image                                = 
| image_size                           = 
| image_caption                        = 
| image_alt                            = 
| location_map                         = 
| location_map_size                    = 
| location_map_caption                 = 
| location_map_alt                     = 
| mapframe = <!-- "yes" to show an interactive map -->
| coordinates                          = <!-- {{coord|..|..|type:landmark|display=inline,title}}-->
| country                              = 
| location                             = 
| purpose                              = 
| status                               = 
| construction_began                   = 
| opening                              = 
| demolished                           = 
| cost                                 = 
| builder                              = 
| designed_by                          = 
| owner                                = 
| operator                             = 
| dam_type                             = 
| dam_crosses                          = 
| dam_height_foundation                = 
| dam_height_thalweg                   = 
| dam_length                           = 
| dam_elevation_crest                  = 
| dam_width_crest                      = 
| dam_width_base                       = 
| dam_volume                           = 
| spillway_count                       = 
| spillway_type                        = 
| spillway_length                      = 
| spillway_capacity                    = 
| spillway_volumetric_flow_rate        = 
| spillway_type2                       = 
| spillway_length2                     = 
| spillway_capacity2                   = 
| spillway_volumetric_flow_rate2       = 
| spillway_type3                       = 
| spillway_length3                     = 
| spillway_capacity3                   = 
| spillway_volumetric_flow_rate3       = 
| res_name                             = 
| res_capacity_total                   = 
| res_capacity_active                  = 
| res_capacity_inactive                = 
| res_catchment                        = 
| res_surface                          = 
| res_max_length                       = 
| res_max_width                        = 
| res_max_depth                        = 
| res_elevation                        = 
| res_tidal_range                      = 
| lower_dam_type                       = 
| lower_dam_crosses                    = 
| lower_dam_height_foundation          = 
| lower_dam_height_thalweg             = 
| lower_dam_length                     = 
| lower_dam_elevation_crest            = 
| lower_dam_width_crest                = 
| lower_dam_width_base                 = 
| lower_dam_volume                     = 
| lower_spillway_count                 = 
| lower_spillway_type                  = 
| lower_spillway_length                = 
| lower_spillway_capacity              = 
| lower_spillway_volumetric_flow_rate  = 
| lower_spillway_type2                 = 
| lower_spillway_length2               = 
| lower_spillway_capacity2             = 
| lower_spillway_volumetric_flow_rate2 = 
| lower_spillway_type3                 = 
| lower_spillway_length3               = 
| lower_spillway_capacity3             = 
| lower_spillway_volumetric_flow_rate3 = 
| lower_res_name                       = 
| lower_res_capacity_total             = 
| lower_res_capacity_active            = 
| lower_res_capacity_inactive          = 
| lower_res_catchment                  = 
| lower_res_surface                    = 
| lower_res_max_length                 = 
| lower_res_max_width                  = 
| lower_res_max_depth                  = 
| lower_res_elevation                  = 
| lower_res_tidal_range                = 
| plant_name                           = 
| plant_coordinates                    = <!-- {{coord|..|..|type:landmark|display=inline}}-->
| plant_operator                       = 
| plant_commission                     = 
| plant_decommission                   = 
| plant_type                           = 
| plant_hydraulic_head                 = 
| plant_turbines                       = 
| plant_pumpgenerators                 = 
| plant_pumps                          = 
| plant_capacity                       = 
| plant_capacity_factor                = 
| plant_efficiency                     = 
| plant_storage_hours                  = 
| plant_annual_gen                     = 
| plant_annual_gen_year                = 
| website                              = 
| extra                                = 
}}

Parameter names and descriptions

Parameter name	Description
name	Name of dam.
name_official	Official name, if different from name. Preferably in native language.
image	Image filename, without File: parameter. Animated (.gif) and media files (.ogv) are also allowed. If empty, then the image from the Wikidata item is used.
image_size	Value to overrides the default 250px.
image_caption	Caption beneath image.
image_alt	Alternative text for image.
location_map	Name of a location map file. The coordinates must be specified as well (see below).
location_map_size	Value to overrides the default 250px.
location_map_caption	Caption beneath location map.
location_map_alt	Alternative text for location map.
coordinates	Geographic coordinates using {{coord}}. See here for more details. Remember to avoid being overly precise.
country	Country where the facility is located. Do not use flag icons.
location	General area where located. Avoid being overly-detailed.
purpose	Purpose of the dam(s). Common reasons are power, irrigation, flood control, navigation. If there are several purposes, consider using: `Multi-purpose`. Field codes: `F`=Flood control, `I`=Irrigation, `N`=Navigation, `P`=Power, `W`=Water supply.
status	Current status of the project. Enter any one of the following auto-expanding fields: `D`=Decommissioned, `O`=Operational, `P`=Proposed, `UC`=Under construction.
construction_began	Date construction began, consider using {{Start date}}.
opening	Date, or future date, of inauguration. Consider using {{Start date}}.
demolished	Date of demolition (i.e. removal or destruction of dam). Consider using {{End date}}.
cost	Total cost of development.
builder	Builder(s) of the dam.
owner	Owner(s) of the dam. Consider limiting to the top two, and include ownership percentage if possible. Example: `Owner1: 60% <br/>Owner2: 40%`
designed_by	Designers of the dam.
operator	Operator(s) of the dam. Only use this parameter if it is different from the owner(s) of the dam.
DAM AND SPILLWAYS
dam_type	Type of dam. Enter any one of the following auto-expanding fields: `A`=Arch dam, `B`=Barrage, `E`=Embankment dam, `F`=Earth-fill dam, `G`=Gravity dam, `H`=Rock-fill dam,`AG`=Arch-gravity dam.
dam_crosses	Body of river or stream below dam
dam_height	Height of dam. Deprecated parameter; use only if `dam_height_foundation` or `dam_height_thalweg` is not known.
dam_height_foundation	Height over foundation bed, with metric conversions.
dam_height_thalweg	Height over thalweg (riverbed), with metric conversions.
dam_length	Length of dam crown, with metric conversions.
dam_elevation_crest	Height of the dam's crest above sea level, with metric conversions.
dam_width_crest	Width at crest of dam, with metric conversions.
dam_width_base	Width at base of dam, with metric conversions.
dam_volume	Volume of material in the dam structure.
spillway_count	Number of spillways.
spillway_type	Type of spillway.
spillway_length	Length of spillway.
spillway_capacity	Capacity of spillway.
spillway_volumetric_flow_rate	Spillway volumetric flow rate.
spillway_type2	Type of 2nd spillway.
spillway_length2	Length of 2nd spillway.
spillway_capacity2	Capacity of 2nd spillway.
spillway_volumetric_flow_rate2	2nd Spillway volumetric flow rate.
spillway_type3	Type of 3rd spillway.
spillway_length3	Length of 3rd spillway.
spillway_capacity3	Capacity of 3rd spillway.
spillway_volumetric_flow_rate3	3rd Spillway volumetric flow rate.
RESERVOIR
res_name	Name of upstream body of water, if different than "dam_crosses".
res_capacity_total	Capacity of reservoir, i.e. megalitres.
res_capacity_active	The active, live or useful capacity (storage) of the reservoir.
res_capacity_inactive	The inactive or dead capacity (storage) of the reservoir.
res_catchment	Area of catchment for reservoir.
res_surface	Surface area (top water level) of reservoir.
res_max_length	Length of the reservoir at normal levels, with metric conversions.
res_max_width	Maximum width of the reservoir at normal levels, perpendicular to length. With metric conversions.
res_max_depth	Maximum water depth of reservoir.
res_elevation	The reservoir's height above sea level at normal levels, with metric conversions.
res_tidal_range	Tidal range, if applicable.
POWER STATION
plant_name	Name of plant, if applicable.
plant_coordinates	Geographic coordinates of the power station using {{coord}}. See here for more details. Remember to avoid being overly precise.
plant_operator	Operator(s) of the hydroelectric power plant.
plant_commission	Power plant commissioning date. May be different than dam opening date.
plant_decommission	Power plant decommissioning date. May be different than dam closing date.
plant_type	Type of hydroelectric power station. Enter any one of the following auto-expanding fields: `C`=Conventional, `P`=Pumped-storage, `R`=Run-of-the-river, `T`=Tidal barrage.
plant_hydraulic_head	Hydraulic head at power station.
plant_turbines	Number of turbines, with respective rated capacity. Exclude any reversible turbine-generators (pump/generators) and pumps from this — it should only contain conventional generation-only turbines.
plant_pumpgenerators	Number of reversible pump–generators, with respective rated capacity. For pumped storage plants only.
plant_pumps	Number of pumps, with respective rated capacity. For pumped storage plants only.
plant_capacity	Current installed capacity, or planned capacity for those under development. For plants which are operational, but have additional capacity under development, please use only the current installed capacity. `MW` suffix will be auto added to a number without unit or any text appended.
plant_capacity_factor	Capacity factor of the power station, in percentage. For pumped storage, please try to rely solely on third-party sources, as manual capacity factor calculations are overly complex for PSH and their results do not align with figures in (authoritative) third-party sources.
plant_efficiency	Overall efficiency of the power station, in percentage. Generally only applicable to pumped storage.
plant_storage_hours	Storage capacity of the power station, in hours (if desired, you can also provide calculated or actual GWh figures in parenthesis). Generally only applicable to pumped storage.
plant_annual_gen	Average annual power generation. To be used in combination with the following plant_annual_gen_year parameter. `GW·h` suffix will be auto added to a number without unit or any text appended.
plant_annual_gen_year	Given generation value exact description. If no description is given, it will default to Annual (i.e. it will expand to Annual generation). Enter following text: `Planned net` if given data is a planned estimate net output `Planned gross` if given data is a planned estimate gross output `YYYY net`, if given data is year YYYY net output `YYYY gross` if given data is year YYYY gross output `Annual net` if given data is a average net output `Annual gross` if given data is a average gross output
website	Raw wikitext for entering website(s). Use [brackets] where appropriate
extras	Free form, spans both columns. Use sparingly.

Coordinates

The coordinates should be specified using coordinates – with a {{coord}} template. See Wikipedia:WikiProject Geographical coordinates#Parameters for more details about setting the coordinates_type.

Mapframe maps

Basic parameters:
- mapframe – Specify yes or no to show or hide the map, overriding the default. Default: no
- mapframe-caption – Caption for the map. Default: blank (or if |mapframe-geomask= is set, "Location in geomask's label")
- mapframe-custom – Use a custom map instead of the automatic mapframe. Specify either a {{maplink}} template, or another template that generates a mapframe map, or an image name. If used, the subsequent mapframe parameters will be ignored. Default: not specified
- mapframe-id or id or qid – Id (Q-number) of Wikidata item to use. Default: item for current page
- mapframe-coordinates or mapframe-coord or coordinates or coord – Coordinates to use, instead of any on Wikidata. Use the {{Coord}} template, e.g. |coord={{Coord|12.34|N|56.78|E}}. Default: coordinates from Wikidata
- mapframe-wikidata – Set to yes to show shape/line features from the wikidata item, if any, when |coord= is set. Default: not specified
Customise which features are displayed:
- mapframe-shape – Turn off display of shape feature by setting to none. Use an inverse shape (geomask) instead of a regular shape by setting to inverse. Default: not specified
- mapframe-point – Turn off display of point feature by setting to none. Force point marker to be displayed by setting to on. Default: not specified
- mapframe-line – Turn off display of line feature by setting to none. Default: not specified
- mapframe-geomask – Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g. P17 for country (P17), P131 for located in the administrative territorial entity (P131)). Default: not specified
- mapframe-switcher – set to auto or geomasks or zooms to enable Template:Switcher-style switching between multiple mapframes. Default: not specified
  - auto – switch geomasks found in location (P276) and located in the administrative territorial entity (P131) statements on the page's Wikidata item, searching recursively. E.g. an item's city, that city's state, and that state's country.
  - geomasks – switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the mapframe-geomask parameter
  - zooms – switch between "zoomed in"/"zoomed midway"/"zoomed out", where "zoomed in" is the default zoom (with a minimum of 3), "zoomed out" is 1, and "zoomed midway" is the average
Other optional parameters:
- mapframe-frame-width or mapframe-width – Frame width. Default: 270
- mapframe-frame-height or mapframe-height – Frame height. Default: 200
- mapframe-shape-fill – Color used to fill shape features. Default: #606060
- mapframe-shape-fill-opacity – Opacity level of shape fill, a number between 0 and 1. Default: 0.5
- mapframe-stroke-color or mapframe-stroke-colour – Color of line features, and outlines of shape features. Default: #ff0000
- mapframe-stroke-width – Width of line features, and outlines of shape features; default is "5". Default: 5
- mapframe-marker – Marker symbol to use for coordinates; see mw:Help:Extension:Kartographer/Icons for options. Default: not specified (i.e. blank)
  - Can also be set to blank to override any default marker symbol
- mapframe-marker-color or mapframe-marker-colour – Background color for the marker. Default: #5E74F3
- mapframe-geomask-stroke-color or mapframe-geomask-stroke-colour – Color of outline of geomask shape. Default: #555555
- mapframe-geomask-stroke-width – Width of outline of geomask shape. Default: 2
- mapframe-geomask-fill – Color used to fill outside geomask features. Default: #606060
- mapframe-geomask-fill-opacity – Opacity level of fill outside geomask features, a number between 0 and 1. Default: 0.5
- mapframe-zoom – Set the zoom level, from "1" (map of earth) to "18" (maximum zoom in), to be used if the zoom level cannot be determined automatically from object length or area. Default: 10
- mapframe-length_km or mapframe-length_mi or mapframe-area_km2 or mapframe-area_mi2 – Determine zoom level by passing in object's length (in kilometres or miles) or area (in square kilometres or square miles). Default: not specified
- mapframe-frame-coordinates or mapframe-frame-coord – Alternate latitude and longitude coordinates for initial placement of map, using {{coord}}. Default: derived from item coordinates

Microformat

The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

Sub-templates

If the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

Classes

hCard uses HTML classes including:

adr
agent
category
county-name
extended-address
fn
label
locality
nickname
note
org
region
street-address
uid
url
vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

geo
latitude
longitude

Please do not rename or remove these classes nor collapse nested elements which use them.

Precision

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.

Tracking category

Category:Pages using infobox dam with unknown parameters (0)

TemplateData

Click the [show] link to the right to display the TemplateData.

This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for Template:Infobox dam in articles based on its TemplateData.

TemplateData for Infobox dam

Infobox for a dam

Template parameters[Edit template data]
This template prefers block formatting of parameters.
Parameter		Description	Type	Status
Name	`name`	Name of dam	String	optional
Official name	`name_official`	Official name, if different from name. Preferably in native language.	String	optional
Image caption	`image_caption`	Caption beneath image.	String	optional
Image alternative text	`image_alt`	Alternative text for image.	String	optional
Location map caption	`location_map_caption`	Caption beneath location map.	String	optional
Location map alternative text	`location_map_alt`	Alternative text for location map.	String	optional
coordinates	`coordinates`	Geographic coordinates using the coord template	String	optional
Country	`country`	Country where the facility is located. Do not use flag icons.	String	optional
Location	`location`	General area where located. Avoid being overly-detailed.	String	optional
Purpose	`purpose`	Purpose of the dam(s). Common reasons are power, irrigation, flood control, navigation. If there are several purposes, consider using: Multi-purpose. Field codes: F=Flood control, I=Irrigation,, N=Navigation, P=Power.	String	optional
Status	`status`	Current status of the project. Enter any one of the following auto-expanding fields: D=Decommissioned, O=Operational, P=Proposed, UC=Under construction.	String	optional
Construction began	`construction_began`	Date construction began, consider using {{Start date}}.	String	optional
Opening date	`opening`	Date, or future date, of inauguration. Consider using {{Start date}}.	String	optional
Demolished date	`demolished`	Date of demolition (i.e. removal or destruction of dam). Consider using {{End date}}.	String	optional
Cost	`cost`	Total cost of development.	String	optional
Owner	`owner`	Owner(s) of the dam. Consider limiting to the top two, and include ownership percentage if possible. Example Owner1: 60%<br/>Owner2: 40%	String	optional
Operator	`operator`	Operator(s) of the dam. Only use this parameter if it is different from the owner(s) of the dam.	String	optional
Dam type	`dam_type`	Type of dam. Enter any one of the following auto-expanding fields: A=Arch dam, B=Barrage, E=Embankment dam, F=Earth-fill dam, G=Gravity dam, AG=Arch-gravity dam.	String	optional
Dam crosses	`dam_crosses`	Body of river or stream below dam	String	optional
Dam height over foundation	`dam_height_foundation`	Height over foundation bed, with metric conversions.	String	optional
Dam height over thalweg	`dam_height_thalweg`	Height over thalweg (riverbed), with metric conversions.	String	optional
Dam length	`dam_length`	Length of dam crown, with metric conversions.	String	optional
Dam elevation crest	`dam_elevation_crest`	Height of the dam's crest above sea level, with metric conversions.	String	optional
Dam width crest	`dam_width_crest`	Width at crest of dam, with metric conversions.	String	optional
Dam width at base	`dam_width_base`	Width at base of dam, with metric conversions.	String	optional
Dam volume	`dam_volume`	Volume of material in the dam structure.	String	optional
Spillway count	`spillway_count`	Number of spillways.	Number	optional
Spillway type	`spillway_type`	Type of spillway.	String	optional
Spillway capacity	`spillway_capacity`	Capacity of spillway.	String	optional
Reservoir name	`res_name`	Name of upstream body of water, if different than "dam_crosses".	String	optional
Reservoir capacity	`res_capacity_total`	Capacity of reservoir, i.e. megalitres.	String	optional
Reservoir active capacity	`res_capacity_active`	The active, live or useful capacity (storage) of the reservoir.	String	optional
Reservoir inactive capacity	`res_capacity_inactive`	The inactive or dead capacity (storage) of the reservoir.	String	optional
Reservoir catchment area	`res_catchment`	Area of catchment for reservoir.	String	optional
Reservoir surface area	`res_surface`	Surface area (top water level) of reservoir.	String	optional
Reservoir maximum length	`res_max_length`	Length of the reservoir at normal levels, with metric conversions.	String	optional
Reservoir maximum width	`res_max_width`	Maximum width of the reservoir at normal levels, perpendicular to length. With metric conversions.	String	optional
Reservoir maximum depth	`res_max_depth`	Maximum water depth of reservoir.	String	optional
Reservoir elevation	`res_elevation`	The reservoir's height above sea level at normal levels, with metric conversions.	String	optional
Reservoir tidal range	`res_tidal_range`	Tidal range, if applicable.	String	optional
Plant name	`plant_name`	Name of plant, if applicable.	String	optional
Plant operator	`plant_operator`	Operator(s) of the hydroelectric power plant.	String	optional
Plant coordinates	`plant coordinates`	Geographic coordinates of the power station using the coord template	String	optional
Plant commissioning date	`plant_commission`	Power plant commissioning date. May be different than dam opening date.	String	optional
Plant decommissioning date	`plant_decommission`	Power plant decommissioning date. May be different than dam closing date.	String	optional
Plant type	`plant_type`	Type of hydroelectric power station. Enter any one of the following auto-expanding fields: C=Conventional, P=Pumped-storage, R=Run-of-the-river, T=Tidal barrage.	String	optional
Plant hydraulic head	`plant_hydraulic_head`	Hydraulic head at power station.	String	optional
Plant turbine count/capacity	`plant_turbines`	Number of turbines, with respective rated capacity.	String	optional
Plant generation capacity	`plant_capacity`	Installed generation capacity, measured in megawatts (MW).	String	optional
Plant capacity factor	`plant_capacity_factor`	Capacity factor of the power station, in percentage.	String	optional
Plant annual power generation	`plant_annual_gen`	Average annual power generation of the previous year. Measured in gigawatt-hours (GWh)	String	optional
Website	`website`	Raw wikitext for entering website(s). Use [brackets] where appropriate	Content	optional
Extra data	`extra`	Free form, spans both columns. Use sparingly.	String	optional
Location map	`location_map`	The name of the pushpin map. Needs coordinates. Example China	Unknown	suggested

The above documentation is transcluded from Template:Infobox dam/doc.
Editors can experiment in this template's sandbox and testcases pages.
Add categories to the /doc subpage. Subpages of this template.

v t e Buildings and structures infobox templates
Infobox building
Buildings	airport archives brewery casino convention center desalination plant factory hospital housing project hut library lighthouse mill building museum observatory oil refinery power station prison religious building church Hindu temple LDS Temple monastery restaurant school shopping mall station venue
Structures	artwork including statues bell bridge type dam fishery future infrastructure project historic site laboratory military installation monument military memorial pier pipeline power transmission line pyramid roller coaster dual room swimming pool telescope transmitter tunnel urban development project water ride windmill

{{{name}}}
${{{image_alt}}}$ {{{image_caption}}}
${{{location_map_alt}}}$ ${{{location_map_alt}}}$ {{{location_map_caption}}}
Official name	{{{name_official}}}
Country	{{{country}}}
Location	{{{location}}}
Coordinates	0°N 0°E / 0°N 0°E / 0; 0
Purpose	{{{purpose}}}
Status	{{{status}}}
Construction began	{{{construction_began}}}
Opening date	{{{opening}}}
Demolition date	{{{demolished}}}
Construction cost	{{{cost}}}
Built by	{{{builder}}}
Designed by	{{{designed_by}}}
Owner(s)	{{{owner}}}
Operator(s)	{{{operator}}}
Upper dam and spillways
Type of dam	{{{dam_type}}}
Impounds	{{{dam_crosses}}}
Height (foundation)	{{{dam_height_foundation}}}
Height (thalweg)	{{{dam_height_thalweg}}}
Length	{{{dam_length}}}
Elevation at crest	{{{dam_elevation_crest}}}
Width (crest)	{{{dam_width_crest}}}
Width (base)	{{{dam_width_base}}}
Dam volume	{{{dam_volume}}}
Spillways	{{{spillway_count}}}
Spillway type	{{{spillway_type}}}
Spillway length	{{{spillway_length}}}
Spillway capacity	{{{spillway_capacity}}}
Spillway volumetric flow rate	{{{spillway_volumetric_flow_rate}}}
Spillway type	{{{spillway_type2}}}
Spillway length	{{{spillway_length2}}}
Spillway capacity	{{{spillway_capacity2}}}
Spillway volumetric flow rate	{{{spillway_volumetric_flow_rate2}}}
Spillway type	{{{spillway_type3}}}
Spillway length	{{{spillway_length3}}}
Spillway capacity	{{{spillway_capacity3}}}
Spillway volumetric flow rate	{{{spillway_volumetric_flow_rate3}}}
Upper reservoir
Creates	{{{res_name}}}
Total capacity	{{{res_capacity_total}}}
Active capacity	{{{res_capacity_active}}}
Inactive capacity	{{{res_capacity_inactive}}}
Catchment area	{{{res_catchment}}}
Surface area	{{{res_surface}}}
Maximum length	{{{res_max_length}}}
Maximum width	{{{res_max_width}}}
Maximum water depth	{{{res_max_depth}}}
Normal elevation	{{{res_elevation}}}
Tidal range	{{{res_tidal_range}}}
Lower dam and spillways
Type of dam	{{{lower_dam_type}}}
Impounds	{{{lower_dam_crosses}}}
Height (foundation)	{{{lower_dam_height_foundation}}}
Height (thalweg)	{{{lower_dam_height_thalweg}}}
Length	{{{lower_dam_length}}}
Elevation at crest	{{{lower_dam_elevation_crest}}}
Width (crest)	{{{lower_dam_width_crest}}}
Width (base)	{{{lower_dam_width_base}}}
Dam volume	{{{lower_dam_volume}}}
Spillways	{{{lower_spillway_count}}}
Spillway type	{{{lower_spillway_type}}}
Spillway length	{{{lower_spillway_length}}}
Spillway capacity	{{{lower_spillway_capacity}}}
Spillway volumetric flow rate	{{{lower_spillway_volumetric_flow_rate}}}
Spillway type	{{{lower_spillway_type2}}}
Spillway length	{{{lower_spillway_length2}}}
Spillway capacity	{{{lower_spillway_capacity2}}}
Spillway volumetric flow rate	{{{lower_spillway_volumetric_flow_rate2}}}
Spillway type	{{{lower_spillway_type3}}}
Spillway length	{{{lower_spillway_length3}}}
Spillway capacity	{{{lower_spillway_capacity3}}}
Spillway volumetric flow rate	{{{lower_spillway_volumetric_flow_rate3}}}
Lower reservoir
Creates	{{{lower_res_name}}}
Total capacity	{{{lower_res_capacity_total}}}
Active capacity	{{{lower_res_capacity_active}}}
Inactive capacity	{{{lower_res_capacity_inactive}}}
Catchment area	{{{lower_res_catchment}}}
Surface area	{{{lower_res_surface}}}
Maximum length	{{{lower_res_max_length}}}
Maximum width	{{{lower_res_max_width}}}
Maximum water depth	{{{lower_res_max_depth}}}
Normal elevation	{{{lower_res_elevation}}}
Tidal range	{{{lower_res_tidal_range}}}
{{{plant_name}}}
Coordinates	1°1′1″N 1°1′1″E / 1.01694°N 1.01694°E / 1.01694; 1.01694
Operator(s)	{{{plant_operator}}}
Commission date	{{{plant_commission}}}
Decommission date	{{{plant_decommission}}}
Type	{{{plant_type}}}
Hydraulic head	{{{plant_hydraulic_head}}}
Turbines	{{{plant_turbines}}}
Pump-generators	{{{plant_pumpgenerators}}}
Pumps	{{{plant_pumps}}}
Installed capacity	{{{plant_capacity}}}
Capacity factor	{{{plant_capacity_factor}}}
Overall efficiency	{{{plant_efficiency}}}
Storage capacity	{{{plant_storage_hours}}}
Annual generation	{{{plant_annual_gen}}}
Website {{{website}}}
{{{extra}}}